The laser surface treatment effective on Mechanical properties Cerment compounds(Al2O3+Ni-Al)
Article Sidebar
Main Article Content
Abstract
This work investigates the using thermal spray coating by Flame as a method to produce high performance cerment coating. In this study , an alumina was added to the self bounding of Ni- Al .This cerment composite materials sprayed through aflame towards a graphite substrate . The aim of the work is to see the effective of laser treatment on the microstructural of the coating layers . The results show that coating consists of different morphology zones surface defects and pores . The laser analysis predicts that remelted all surface particles with a significant high surface tension , producing strongly hardness with improvement in the structurel and mechanical properties.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
References
[1] W. Sebinki, J.I. lubinski, K. Druct , Advances in Materials science , Vol.4, No.2(4), (2003) p 71.Ole Sadven, "Laser Surface Transformation Hardening ", Metals Handbook, 9th Edition, Vol. 4, (1988), pp (507- 517).
[2] I.K. Jassim and A.Khalid, College of Engineering Journal, Saddam University, Vol.1, 2001, p. (126).
[3] J. Touminen, P. Vuoristo, T.mäntylä, M. Kylmälahti, J. Vihinen,“ Immproving corrosion properties of High velocity oxy – fuel Sprayed Inconel 625 by using ahigh power continiuous wave Neodymium - Doped Yttrium Aluminium garnet Laser” , thermal spray technology , Vol. 9 , pp. ( 513 – 519 ) , 2003 .
[4] (ASTM): American Standard of Testing Materials.
[5]: Powder Diffraction File, Inorganic volume, card no. (10-173), published by joint committee on powder diffraction standards, 1974.
[6] V.Vilms and p. Herman ,Of 8th International Thermal Spraying Conference, 1988.
[7] D. Zhu, R.A. Miller, thermo physical and thermomechanical properties of thermal barrier coating systems, ceram. sci.proc. vol.21, pp. (623-633), 2000.